# Base shim kit ideas wanted **URL:** \ **Category:** Uncategorized\ **Created:** [October 19, 2025, 3:58pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686 "2025-10-19T15:58:27Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![Paracas](https://avatars.discourse-cdn.com/v4/letter/p/ce73a5/32.png) [@Paracas](https://forum.progressionproject.com/u/Paracas)\ **Post date:** [October 19, 2025, 3:58pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/1 "2025-10-19T15:58:27Z")
Any suggestions for a cost effective set of different size base shims for a Lift foil? I don’t have a computer printing setup ---
**Author:** ![Foilcpg](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@Foilcpg](https://forum.progressionproject.com/u/Foilcpg)\ **Post date:** [October 21, 2025, 3:22pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/2 "2025-10-21T15:22:38Z")
Code foils has a set of downloadable files for base plates at different degrees. Used them with an axis mast. And they worked good I have a stepson who is an engineer at NASA that has all the toys. He can get them printed for you at a reasonable price. Dm me if your keen Cheers ---
**Author:** ![Paracas](https://avatars.discourse-cdn.com/v4/letter/p/ce73a5/32.png) [@Paracas](https://forum.progressionproject.com/u/Paracas)\ **Post date:** [October 21, 2025, 3:47pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/3 "2025-10-21T15:47:44Z")
Not sure if the Code base will work with lift but don’t see why not. Would love a quarter and 2 half inch ones printed if it is not too much trouble. Many thnx, David 253-549-5920 ---
**Author:** ![Hdip](https://avatars.discourse-cdn.com/v4/letter/h/a4c791/32.png) [@Hdip](https://forum.progressionproject.com/u/Hdip)\ **Post date:** [October 21, 2025, 6:23pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/4 "2025-10-21T18:23:35Z")
@venturaChris 3d prints foil stuff for me. I think he’s offering to print for other people now too. ---
**Author:** ![venturaChris](https://avatars.discourse-cdn.com/v4/letter/v/d07c76/32.png) [@venturaChris](https://forum.progressionproject.com/u/venturaChris)\ **Post date:** [October 21, 2025, 6:52pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/5 "2025-10-21T18:52:46Z")
I print the code foils shims for $16 shipped. ---
**Author:** ![Foilcpg](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@Foilcpg](https://forum.progressionproject.com/u/Foilcpg)\ **Post date:** [October 21, 2025, 7:45pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/6 "2025-10-21T19:45:22Z")
Hi David I will send a picture along of the base plate that my step son printed From here I will reach out to him and get him in contact with you. Just as a plan b, I looked on Etsy and saw a lot of printed base plates for foils Cheers Christian ---
**Author:** ![Paracas](https://avatars.discourse-cdn.com/v4/letter/p/ce73a5/32.png) [@Paracas](https://forum.progressionproject.com/u/Paracas)\ **Post date:** [October 21, 2025, 9:53pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/8 "2025-10-21T21:53:31Z")
Thnx, appreciate the input and contact. David ---
**Author:** ![Foilcpg](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@Foilcpg](https://forum.progressionproject.com/u/Foilcpg)\ **Post date:** [October 21, 2025, 10:21pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/9 "2025-10-21T22:21:40Z")
![](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/2X/1/1a2a56e1a2fa39b88655ce120be22fbce0c9b22f.jpeg) ---
**Author:** ![Foilcpg](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@Foilcpg](https://forum.progressionproject.com/u/Foilcpg)\ **Post date:** [October 21, 2025, 10:23pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/10 "2025-10-21T22:23:02Z")
I know cedrus mast use to sell base plate shims also ---
**Author:** ![Paracas](https://avatars.discourse-cdn.com/v4/letter/p/ce73a5/32.png) [@Paracas](https://forum.progressionproject.com/u/Paracas)\ **Post date:** [October 22, 2025, 12:06am UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/11 "2025-10-22T00:06:16Z")
Cedrus is very expensive in my experience. ---
**Author:** ![Paracas](https://avatars.discourse-cdn.com/v4/letter/p/ce73a5/32.png) [@Paracas](https://forum.progressionproject.com/u/Paracas)\ **Post date:** [October 25, 2025, 6:19pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/12 "2025-10-25T18:19:59Z")
Thnx very much . Bought a 1 degree plate from Blue Planet. Will try that and if it is too much will get back to you about .25,.5. Thnx alot for offering to help ---
**Author:** ![Paracas](https://avatars.discourse-cdn.com/v4/letter/p/ce73a5/32.png) [@Paracas](https://forum.progressionproject.com/u/Paracas)\ **Post date:** [October 25, 2025, 6:21pm UTC](https://forum.progressionproject.com/t/base-shim-kit-ideas-wanted/12686/13 "2025-10-25T18:21:33Z")
Thnx, bought a 1 degree plate from Blue Planet. If that is too much will get back to you about making some with .25,.5". Thnx