Design a better leash

I wear the Ride Engine reel leash on my waste. When putting your leg over the board your leg does seem to catch it. But once you have got the para flying and you swing your leg back it clears.

It doesn’t tend to get trapped under your foot like other leashes.

1 Like

I move the leash to the appropriate side (opposite to the board) when I’m floating in the water, before getting onto the board. Usually just by swinging my legs over it in the water or spin around. Then it never gets in the way when I’m on the board.

1 Like

Has anyone put some time in on the Ride Engine Reel Leash in solid surf conditions?

It looks like it could be a good option for parawing but I’d also like to trust it in breaking overhead waves (either on parawing or more likely using my 87L SUP, so it would need to be able to take a fair load when I inevitably get blown up)

Currently using a standard 6ft surf leash when parawinging and a 8mm Kaohi coil when SUP in the surf. Neither are perfect.

1 Like

When using the Ozone v1 belt with only a left attachment I always ended up with my leash under my left knee/foot.

I have since moved to the Kaohi Stowaway with a dyneema connector line allowing the leash to slide to either side and this has eliminated about 90% of the cases where my leash ends up under me.

1 Like

This is the shock absorber i am using now, one at belt and one at board.Works well.Sandow is dyneema cover 4mm

I generally give some grace to manufacturers even if I don’t like the product but the Ride Engine Reel Leash sucks so badly that I need to put out the PSA. This is a classic case of overengineering making a product worse. Note that I used the leash with the calf attachment for TWO parawing sessions total.

  1. The reel leash pulled off the cuff. It simply broke. It was assembled correctly with two screws (yes I used the right length screws which were provided with the item). One of the two screws just pulled through the cuff. There were falls, but none were out of the ordinary and the conditions weren’t “heavy”. It was during the second session but otherwise I don’t even know when it happened. I was one tiny screw away from losing my board for the rest of the session and the cuff can’t really be repaired.
  2. At one point the leash wrapped my mast. This is user error that happens every once in a while and it has happened with many of my leashes with no issues. This time it damaged the trailing edge of the mast. This has never happened to me with any other leash. I suppose the thin diameter of the leash combined with the lack of elasticity resulted in this issue. Before anyone says this is what broke the reel - this happened on the first session, not the same session as the cuff attachment breaking. Again - not heavy conditions.
  3. The bulky reel is just uncomfortable when taxing or kneeling on the board. It’s like carrying a friggin Walkman on your leg (anyone with the Walkman reference?)
  4. This is probably more just preference but I don’t like how far the board gets from me with this leash. I Like being able to grab my leash and control my board and wasn’t really possible with this leash.

Maybe it works better with a waist belt? Maybe (probably) I’m just a kook? More likely this thing just isn’t the answer.

I’ve bought other products that weren’t for me and I didn’t flame them, but I can’t let this one slide.

2 Likes

It sounds like you forgot to add the washers to the screws so they don’t pull out. Most people seem to use this as a waist leash, which is great. The ankle version does look awkward. Maybe if you are not familiar with reel leashes in general, it feels weird to have the board so far away at first, but this is definitely the best reel leash I have seen.

Nope. The washers were on there.

I did caveat that the distance from the board could just be a preference thing, but otherwise this thing (at least in the calf leash form) is not good.

That’s a bummer, it sounds like there is a defect with the ankle attachment. You should get it warrantied or something.

Fair enough. See if you can get it warrantied. I suppose over a time we’ll see if this problem crops up with other users or whether your experience was a one off. I haven’t had any of those issues so far, but will definitely keep this in mind if something happens.

BTW, I wrote about this above, but I also wasn’t a big fan of it on my calf. I ended up attaching it to my ankle and it worked much better for me there even though the rectangular plate in the cuff for mounting the reel is a bit too long and so the cuff seems like it doesn’t fit securely (but still it does). If you do get a replacement and still willing to try it, try placing it on your ankle.

Hey guys,

are there any COMPANIES/MANUFACTURERS reading along or people who have some CONTACTS?

I have DEVELOPED A LEASH that basically SOLVES MOST if not all of the PROBLEMS, especially for PARAWINGING and want to get it made/get it out there.

  • does not tangle with a parawing
  • stretches from less than 1m length to 3m to get your board out of the way on high speed falls
  • no/very gentle springback
  • some elasticity to it to not rip your leg off in small to medium waves
  • very simple/no moving parts/no PU/easy to manufacture (if you see it you would wonder why you hadn’t come up with the idea yourself haha)

Bold claim it might seem but i made some for myself and have been using them for nearly a year now, works perfectly, way better than anything else i have seen out there.

Won’t be putting out pictures or more details just now, i put too much time and money into this sorry :slight_smile:

Other foiling accessories and equipment in development as well. I am a boat design engineer btw.

Thanks!

Andi

6 Likes

You could try Antonin at https://kparts-watersports.com/a-propos/

Might show more interest than big companies.

1 Like

This is my biggest gripe with literally anything in the chain of failure that is not either of dyneema or surf leash. If it breaks, you might suddenly be discovering the extent of your endurance

can you make it impossible to snap?

2 Likes

yep, pretty much bombproof…although you might actually want it to snap if the pull exceeds certain values, similar to a surf leash (not an old one obviously)

You probably know this already, but please make sure your IP and patent protections are completely in order before sharing anything. It doesn’t matter if it’s with companies or random forum members. If you are serious about making money off your idea, you need those legal guardrails in place first.

I learned this the hard way. I shared a leash design with an industry contact and was told the idea wouldn’t go anywhere. Less than a year later, it was launched on the market with a “patent pending” tag. When I reached back out, I was told: “Yeah, you had a great idea. Should have patented it.”

Protect your ideas before you show it to anyone.

6 Likes

don’t have the RIDE ENGINE yet only because my original OCEANUS is still going strong after over 5 years of non stop Wingfoil… have been WORKED in waves from baja to Pacasmayo to hard fast crashes in the Gorge to severe fuck ups in the cancun shorebreak of the hotel zone… damn thing KEEPS saving my board and keeps reeling right back up with little to zero maintenance.

i use it together with an old Fone kite leash “pull release” just in case i need to ditch the board fast. I highly doubt that the new Ride engine “mini” version is any LESS robust but… haven’t gotten my hands on one yet.

1 Like

I believe the Oceanus reel leash isn’t in production any more, but I agree - mine lasted a long time and worked perfectly when I did finally sell it. Never had a problem with it. I only sold it because I started to use the Blue Planet reel leash when it came out. Its quite nice, lighter and smaller than the Oceanus and just as beefy/reliable.

I do believe the Ride Engine is a bit smaller and lighter still, but if I’d pick one that will never break every time.

1 Like

I just ordered this stash belt to use with the reel leash. Have zero clue if it will be good or not. Anyone here already tried it?

A friend of mine got the V1 and he loved it. He did have a couple of small criticisms. I can’t remember exactly what they were. I think one of them had to do with the velcro in the knife pocket being inverse of what most kite knife on the market have. In any case, he gave feedback to the designer who apparently very quickly corrected them and put out the V2 so you should be good to go! Thinking about it myself for next season just so I can get the reel leash off my ankle.

1 Like