# F-one XXS fuse and Chopped Carve 200 stabilizer

**URL:** https://forum.progressionproject.com/t/f-one-xxs-fuse-and-chopped-carve-200-stabilizer/6772
**Category:** Buy and Sell Foil Gear
**Created:** [September 9, 2024, 1:47pm UTC](https://forum.progressionproject.com/t/f-one-xxs-fuse-and-chopped-carve-200-stabilizer/6772 "2024-09-09T13:47:05Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Bido11561](https://avatars.discourse-cdn.com/v4/letter/b/90ced4/32.png) [@Bido11561](https://forum.progressionproject.com/u/Bido11561)
#### Post date: [September 9, 2024, 1:47pm UTC](https://forum.progressionproject.com/t/f-one-xxs-fuse-and-chopped-carve-200-stabilizer/6772/1 "2024-09-09T13:47:06Z")

</div>

Like new other than the chop job obviously. I just don’t use it, I like a longer fuse.

 ![IMG_2556](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/2X/e/e55ca17df79daa5bc92688446950636efd17b265.jpeg)  
 ![IMG_2557](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/2X/5/5f62cb5cbfd8eed777f1cff054de6b134e6fa28b.jpeg)  
 ![IMG_2558](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/2X/4/40ef870cae7963745a34a8d98505be3e8f9a6b3b.jpeg)  
 ![IMG_2559](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/2X/6/6e8101a86242d3be321d664b40a42187706ac137.jpeg)  
 ![IMG_2560](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/2X/8/8668eed5601588e5faec56bac3f20da0a9dd153b.jpeg)