# One Ocean UHM Mast **URL:** \ **Category:** Foils and Boards - Gear Talk\ **Created:** [January 10, 2025, 10:53pm UTC](https://forum.progressionproject.com/t/one-ocean-uhm-mast/8265 "2025-01-10T22:53:34Z")\ **Posts on this page:** 1\ **Showing post:** 126
**Author:** ![Gaetan](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/gaetan/32/15037_2.png) [@Gaetan](https://forum.progressionproject.com/u/Gaetan)\ **Post date:** [October 4, 2026, 2:07pm UTC](https://forum.progressionproject.com/t/one-ocean-uhm-mast/8265/126 "2026-10-04T14:07:14Z")
I hope you don’t mind me jumping in with some feedback even though the question wasn’t addressed to me directly. I previously owned both the AXIS Crazyshort and Ultrashort Advanced+ with the zinc anode, so that’s my main reference. With the One Ocean titanium system, I use two fuselages with two different mast positions. One keeps essentially the same mast position as the AXIS Advanced+, and that’s still the geometry I prefer for pumping. The other titanium fuselage is about 3 cm longer, with the mast also about 3 cm further aft relative to the front wing. With high-aspect wings like the Fireballs, I really like that setup for carving: it gives a noticeably more planted and natural feel through turns, with more yaw stability. I’ve written a much more detailed comparison her : > [@Same fuse length, different foil behaviour: the forgotten mast-to-FW distance](https://forum.progressionproject.com/t/same-fuse-length-different-foil-behaviour-the-forgotten-mast-to-fw-distance/16551): > > This topic has already sparked a few debates. To me, mast-to-front-wing (while keeping the overall fuse length identical) still feels like one of those hidden tuning parameters that everyone indirectly talks about, but very few people actually isolate and test properly, and the answers are often contradictory. So here are my views after few recent experiments. It’s not that no brand allows you to play with it. Axis actually does, in a way, through the different Black / Advance / Advance+ / Adva… For glide, I honestly find them very difficult to separate — AXIS and One Ocean both feel similarly efficient to me. No issues at all with strength, no noticeable difference in stiffness versus AXIS, and the mast/fuselage interfaces are very clean, solid and tight fit (I only own One Ocean masts). The only small adjustment I had to make was lightly sanding the stabilizer seat on the carbon tails to correct roughly \<1° of roll misalignment. After that, everything was spot on. --- _[View the full topic](https://forum.progressionproject.com/t/one-ocean-uhm-mast/8265)._