# Put Nitinol stiffeners in parawings and wings

**URL:** <https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139>\
**Category:** Uncategorized\
**Tags:** parawing\
**Created:** [September 28, 2026, 10:11am UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139 "2026-09-28T10:11:24Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Matt](https://avatars.discourse-cdn.com/v4/letter/m/a6a055/32.png) [@Matt](https://forum.progressionproject.com/u/Matt)\
**Post date:** [September 29, 2026, 4:29pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/21 "2026-09-29T16:29:34Z")

</div>

yes I’ve got a V1 PR and the ears are collapse prone, and soft lines. Interested in a cheap way to revitalise it (Yes yes jog on mr user error please 😂)

---

<div class="post-metadata">

**Author:** ![Jonnpow](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/jonnpow/32/10_2.png) [@Jonnpow](https://forum.progressionproject.com/u/Jonnpow)\
**Post date:** [October 3, 2026, 4:14pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/22 "2026-10-03T16:14:16Z")

</div>

How does the diameter compare to the standard battens? If it’s much narrower there could be fast wear all along the pocket.

---

<div class="post-metadata">

**Author:** ![artsurf](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@artsurf](https://forum.progressionproject.com/u/artsurf)\
**Post date:** [October 3, 2026, 6:02pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/23 "2026-10-03T18:02:42Z")

</div>

it is only 1mm, so indeed abrasion might be a problem, and the tips are sharp so they have caps, at least naish has caps, and in their prototypes they had problems with these things sticking out everywhere, before they had caps.

---

<div class="post-metadata">

**Author:** ![Gonefoiling](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/gonefoiling/32/14360_2.png) [@Gonefoiling](https://forum.progressionproject.com/u/Gonefoiling)\
**Post date:** [October 3, 2026, 6:47pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/24 "2026-10-03T18:47:21Z")

</div>

you can get those in any size. but 1mm is plenty stiff

---

<div class="post-metadata">

**Author:** ![Matt](https://avatars.discourse-cdn.com/v4/letter/m/a6a055/32.png) [@Matt](https://forum.progressionproject.com/u/Matt)\
**Post date:** [October 30, 2026, 10:22am UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/25 "2026-10-30T10:22:13Z")

</div>

Does anyone have a Hatch v2 and can get a picture of what they do to the ends? I bought some of this off amazon and it’s funny how robust it is. Immediately thought I’d kinked it but no it’s seemingly not possible. Planning to sort the PRv1 4.3 folding tips

---

<div class="post-metadata">

**Author:** ![Gonefoiling](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/gonefoiling/32/14360_2.png) [@Gonefoiling](https://forum.progressionproject.com/u/Gonefoiling)\
**Post date:** [October 30, 2026, 3:40pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/26 "2026-10-30T15:40:20Z")

</div>

Or Core Lotus batten end pics would do

This is a close up from another Matt’s video. you can see that Naish uses Kevlar (?). there is an interview where this is mentioned

 ![Screenshot 2026-10-30 at 9.02.55 AM](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/3X/1/a/1a4669bba3e4b5e04865351c599305597b8ae41c.jpeg)

Easier way would be to 3d print little t shaped end caps

i put stainless steel caps in my own nitinol conversion

---

<div class="post-metadata">

**Author:** ![Dontsink](https://avatars.discourse-cdn.com/v4/letter/d/ebca7d/32.png) [@Dontsink](https://forum.progressionproject.com/u/Dontsink)\
**Post date:** [October 30, 2026, 4:15pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/27 "2026-10-30T16:15:33Z")

</div>

Wax them.

Candle wax and iron at low temp.

---

<div class="post-metadata">

**Author:** ![FluidFoil](https://avatars.discourse-cdn.com/v4/letter/f/4491bb/32.png) [@FluidFoil](https://forum.progressionproject.com/u/FluidFoil)\
**Post date:** [October 30, 2026, 5:28pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/28 "2026-10-30T17:28:33Z")

</div>

Bike cable end cap crimps would likely work well if they are big enough.

---

<div class="post-metadata">

**Author:** ![artsurf](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@artsurf](https://forum.progressionproject.com/u/artsurf)\
**Post date:** [October 30, 2026, 5:46pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/29 "2026-10-30T17:46:03Z")

</div>

Hi Matt, the kevlar fabric is obvious, and inside i feel that the last 6 or 7mm is thicker than the rod itself, like there is a cap of 2.5 or 3mm thickness, i can not take them out. I would either go for bike cable end caps, or drill 3mm holes in a candle, put epoxy/glassfibers inside the holes and then stick the nitinol battens in there, in a way that they remain 1mm above the bottom of the drilled hole. If you still fear that the batten might poke out then you could cut a microscopic Vshape at each nitinol end, and secure a tiny thread of glassfiber over the tip before you insert the tip into the epoxy in the candle. the second picture gives you an idea of the length of the endcap, i think 6 or 7mm long. I have also read somewhere about crimp caps that go on some types of cheap jewelery.

 ![WhatsApp Image 2026-10-30 at 17.28.07](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/3X/3/e/3e74837d6b50ba5d279392154ecb8f42e5855d6e.jpeg)

 ![WhatsApp Image 2026-10-30 at 17.28.21](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/3X/b/e/be2e45d53f708e4aa3db5d29b5c032e409090164.jpeg)

 ![WhatsApp Image 2026-10-30 at 17.28.33](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/3X/a/7/a7aeeacd6d483e93c9a7f1fb5993061bf83c044f.jpeg)

---

<div class="post-metadata">

**Author:** ![artsurf](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@artsurf](https://forum.progressionproject.com/u/artsurf)\
**Post date:** [October 30, 2026, 6:12pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/30 "2026-10-30T18:12:13Z")

</div>

Another option would be a superthin metal tube, cut it diagonally, put the nitinol in and squeeze very hard with pliers while gently tapping the diagonal end so that the end folds over. And for the fabric, i guess it is difficult to find that same kevlar stuff, but i think that dacron (not waxed) would soak up epoxy, so after sewing the battens in, just apply one drop of epoxy at each tip, that should make the dacron very resistant to abrasion.

---

<div class="post-metadata">

**Author:** ![lebast](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/lebast/32/14400_2.png) [@lebast](https://forum.progressionproject.com/u/lebast)\
**Post date:** [October 31, 2026, 1:34am UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/31 "2026-10-31T01:34:07Z")

</div>

Nothing special on the Core Lotus. Kevlar won’t hurt but seems overkill to me.

Put some caps on the ends as people said, either print them or check the toy kite segment, they dealt with that problem for a couple years.

Ewan makes it sound like rocket science, come on…

---

<div class="post-metadata">

**Author:** ![artsurf](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@artsurf](https://forum.progressionproject.com/u/artsurf)\
**Post date:** [November 10, 2026, 5:02pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/32 "2026-11-10T17:02:01Z")

</div>

Repair: Nitinol stiffeners that start poking out. Sorry that this is in facebook. [https://www.facebook.com/reel/2429394381199885](https://www.facebook.com/reel/2429394381199885) I presume that he might be willing to sell these caps, especially if you explain that this is for upgrading parawings, so it has nothing to do with repairing the things that he does. paraworx.at is the website of Mike Kremer.

---

<div class="post-metadata">

**Author:** ![Gonefoiling](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/gonefoiling/32/14360_2.png) [@Gonefoiling](https://forum.progressionproject.com/u/Gonefoiling)\
**Post date:** [November 11, 2026, 4:34pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/33 "2026-11-11T16:34:23Z")

</div>

Replaced battens on a PRv1

Here is an original batten

 ![IMG_3477.HEIC](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/3X/6/9/69a9e7c29fe3a113df819c17a3b2c16c9d9eb092.jpeg)

Replacement batten with stainless steel caps on both ends

 ![IMG_3478.HEIC](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/3X/d/9/d9da949727ec796d0349e5e6bf58c07ab794e3fe.jpeg)

End cap. the cap has inner diameter of 1.2mm and the batten is 1mm so it has a layer of tape to make it fit a bit more snug. then used pliers to squeeze the cap tight.

 ![IMG_3479.HEIC](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/3X/f/7/f749c61de16db66337a7909f41d235ec56da07f7.jpeg)

---

<div class="post-metadata">

**Author:** ![artsurf](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@artsurf](https://forum.progressionproject.com/u/artsurf)\
**Post date:** [November 11, 2026, 5:53pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/34 "2026-11-11T17:53:44Z")

</div>

Have you ever considered to drill a row of 3mm holes in a candle, and fill them with epoxy+short fibers, and put the nitinol rods in?

---

<div class="post-metadata">

**Author:** ![Gonefoiling](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/gonefoiling/32/14360_2.png) [@Gonefoiling](https://forum.progressionproject.com/u/Gonefoiling)\
**Post date:** [November 11, 2026, 6:39pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/35 "2026-11-11T18:39:34Z")

</div>

the exact solution will vary from brand to brand. my sense is to keep it simple and avoid components that can corrode. This is my second wing to convert to nitinol. first did flysurfer pow and the batten sleeve is different vs. PR in the diameter, stitching as well as in the end sleeve closure. PR is easier to convert. but both are very doable.

---

<div class="post-metadata">

**Author:** ![Gneve](https://avatars.discourse-cdn.com/v4/letter/g/c77e96/32.png) [@Gneve](https://forum.progressionproject.com/u/Gneve)\
**Post date:** [November 12, 2026, 2:36am UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/36 "2026-11-12T02:36:41Z")

</div>

Where did you buy the Nitinol wires? Is removing the old batten and replacing it with the new one pretty straightforward?

---

<div class="post-metadata">

**Author:** ![Gonefoiling](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/gonefoiling/32/14360_2.png) [@Gonefoiling](https://forum.progressionproject.com/u/Gonefoiling)\
**Post date:** [November 12, 2026, 3:17am UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/37 "2026-11-12T03:17:20Z")

</div>

amazon

removal is pretty easy. not difficult but some work is involved. the most time consuming part is prying the sleeve open. then stitching it closed but not nearly as much as the sealing part.

---

<div class="post-metadata">

**Author:** ![artsurf](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@artsurf](https://forum.progressionproject.com/u/artsurf)\
**Post date:** [November 12, 2026, 10:37am UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/38 "2026-11-12T10:37:27Z")

</div>

Nitinol comes in either silver or dark-grey, all the info seems to be about the silver type, but did anyone try the dark-grey ones? Are they just as resistant to corrosion? At aliexpress and amazon i usually find short lengths, but the darkgrey can be found in 5 meter lengths.

---

<div class="post-metadata">

**Author:** ![artsurf](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@artsurf](https://forum.progressionproject.com/u/artsurf)\
**Post date:** [November 12, 2026, 12:54pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/39 "2026-11-12T12:54:44Z")

</div>

CAPS: Mike Kremer from paraworx.at has answered, he writes that the caps for nitinol can easily be bought from the producers (of paragliders). Now i presume that maybe the producers only sell to companies or repairshops, but maybe there will be a few people here (EU and USA) who have a company and are willing to make a few bucks by selling these to people here on this quest.

---

<div class="post-metadata">

**Author:** ![Gonefoiling](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/gonefoiling/32/14360_2.png) [@Gonefoiling](https://forum.progressionproject.com/u/Gonefoiling)\
**Post date:** [November 12, 2026, 4:57pm UTC](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139/40 "2026-11-12T16:57:40Z")

</div>

i got the gray variety and it hasnt shown any signs of corrosion

[Previous page](https://forum.progressionproject.com/t/put-nitinol-stiffeners-in-parawings-and-wings/18139.md?page=1)
