# Track modification

**URL:** <https://forum.progressionproject.com/t/track-modification/7847>\
**Category:** Foils and Boards - Gear Talk\
**Created:** [December 4, 2024, 11:57pm UTC](https://forum.progressionproject.com/t/track-modification/7847 "2024-12-04T23:57:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![CoastalFoil](https://avatars.discourse-cdn.com/v4/letter/c/eb9ed0/32.png) [@CoastalFoil](https://forum.progressionproject.com/u/CoastalFoil)\
**Post date:** [December 4, 2024, 11:57pm UTC](https://forum.progressionproject.com/t/track-modification/7847/1 "2024-12-04T23:57:36Z")

</div>

Picked up a used portal transmedium. Tried to mount my Foil drive with Uni mast to it (m8 hardware) and it seems the tracks are too narrow to connect the t-nut. Anyone have an experience on widening the tracks? I only need about 1.5mm if that, of material removed but if I was to dremel it out what should I then cover the exposed area with to make water right? Full carbon board. Any thoughts are appreciated I was pretty bummed 😅

---

<div class="post-metadata">

**Author:** ![CoastalFoil](https://avatars.discourse-cdn.com/v4/letter/c/eb9ed0/32.png) [@CoastalFoil](https://forum.progressionproject.com/u/CoastalFoil)\
**Post date:** [December 5, 2024, 12:20am UTC](https://forum.progressionproject.com/t/track-modification/7847/2 "2024-12-05T00:20:29Z")

</div>

![image](https://canada1.discourse-cdn.com/flex030/uploads/progressionproject/original/2X/d/d5fa4a5d927b559a55beb34011f5549ecef3dd96.jpeg)  
I am seeing this as a possible solution. Using an adapter for m6 hardware so it will fit within the tracks without any modifications.

---

<div class="post-metadata">

**Author:** ![tangogeoff](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/tangogeoff/32/31_2.png) [@tangogeoff](https://forum.progressionproject.com/u/tangogeoff)\
**Post date:** [December 5, 2024, 12:54am UTC](https://forum.progressionproject.com/t/track-modification/7847/3 "2024-12-05T00:54:32Z")

</div>

I know a number of people for whom the supplied T-nuts were too big. I just used other T-nuts that already fitted.

---

<div class="post-metadata">

**Author:** ![CoastalFoil](https://avatars.discourse-cdn.com/v4/letter/c/eb9ed0/32.png) [@CoastalFoil](https://forum.progressionproject.com/u/CoastalFoil)\
**Post date:** [December 5, 2024, 12:58am UTC](https://forum.progressionproject.com/t/track-modification/7847/4 "2024-12-05T00:58:29Z")

</div>

The t-nuts will fit into the track, the larger m8 bolts that mount the mast are what are too wide.

---

<div class="post-metadata">

**Author:** ![foilpatrol](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/foilpatrol/32/5860_2.png) [@foilpatrol](https://forum.progressionproject.com/u/foilpatrol)\
**Post date:** [December 5, 2024, 11:32pm UTC](https://forum.progressionproject.com/t/track-modification/7847/5 "2024-12-05T23:32:43Z")

</div>

Been using the M6 to M8 adapter for few months. Works great. Not tested for jumping though.
