# Uni Progression 200, 170, 140 & 125, masts, tails, fuses and armstrong prone board for sale **URL:** \ **Category:** Buy and Sell Foil Gear\ **Created:** [July 1, 2024, 4:45am UTC](https://forum.progressionproject.com/t/uni-progression-200-170-140-125-masts-tails-fuses-and-armstrong-prone-board-for-sale/5952 "2024-07-01T04:45:11Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![seangalla](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/seangalla/32/2526_2.png) [@seangalla](https://forum.progressionproject.com/u/seangalla)\ **Post date:** [July 1, 2024, 4:45am UTC](https://forum.progressionproject.com/t/uni-progression-200-170-140-125-masts-tails-fuses-and-armstrong-prone-board-for-sale/5952/1 "2024-07-01T04:45:11Z")
Selling my Unifoil Progression setup. Shoot me a message if interested. 🙂 [Unifoil & Armstrong Wing Foil, Prone, Sup, Wake Kite Hydrofoil Gear](https://www.facebook.com/marketplace/item/1526898798176111/) The progression project foils are on the cutting edge of technology for prone surf, winging, downwind sup, dock starts, and wake foiling. [Performance Hydrofoils (@unifoil) • Instagram photos and videos](https://www.instagram.com/unifoil/) Full carbon. Bomb-proof construction. Incredible efficiency. Great low-end grunt and top-end speed. Jumping on these beauties after riding Lift HA wings for a few years was a huge upgrade. Technically this adds up to a few different kits. Open to selling off in pieces and shipping (from Tofino BC Canada). If you buy a full kit it will cost you $2500-$3000 depending on the gear you select from the list below. Will give better deals if you get a kit. Make me an offer. All prices are in Canadian. FRONT WINGS: > **[Progression Wing](https://uni-foil.com/pages/progression-wing)** > > Unifoil Hydrofoils Progression 200 - A few scratches - $950 200 in² 1290 cm² Span 1037mm Cord 155mm Aspect Ratio 8.3:1 Progression 170 - A few scratches - $925 170 in² 1097 cm² Span 953mm Cord 145mm Aspect Ratio 8.3:1 Progression 140 - Like New - $900 140 in² 908 cm² Span 898mm Cord 130mm Aspect Ratio 8.9:1 Progression 125 - Brand New - $875 125 in² 806cm² Span 898mm Cord 116mm Aspect Ratio 10:1 MASTS: 750 Carbon Mast - Like New - $900 > **[Katana Construction 750 Carbon Mast with cover](https://uni-foil.com/products/katana-construction-750-carbon-mast-with-cover)** > > Legendary strength and toughness Our new Katana super-stiff mast construction was inspired by traditional Japanese sword making. To forge the toughest blades, swordsmiths combined an outer layer of hard steel with a softer iron core for strength and... 830 Carbon Katana Mast - Brand New - $950 > **[Katana Construction 830 Carbon Mast with cover](https://uni-foil.com/products/katana-construction-830-carbon-mast-with-cover)** > > Legendary strength and toughness Our new Katana super-stiff mast construction was inspired by traditional Japanese sword making. To forge the toughest blades, swordsmiths combined an outer layer of hard steel with a softer iron core for strength and... TAILS: Progression 14.5” carbon tail - A few scratches - $275 > **[Progression 14.5" Carbon Tail with cover](https://uni-foil.com/products/progression-14-5-carbon-tail-with-cover)** > > The progression tails are tuned to a neutral foot pressure. They have evolved out of the Shiv tail, our most popular of the 3 packs we’ve sold. The Progression tail is fairly thin giving it some extra speed and pumping efficiency over the Shiv. I’ve... Progression 13.5” carbon tail - Brand new - $300 > **[Progression 13.5" Carbon Tail with cover](https://uni-foil.com/products/progression-13-5-carbon-tail-with-cover)** > > The progression tails are tuned to a neutral foot pressure. They have evolved out of the Shiv tail, our most popular of the 3 packs we’ve sold. The Progression tail is fairly thin giving it some extra speed and pumping efficiency over the Shiv. I’ve... FUSELAGES: 26cm short Fuse - Brand new: $225 > **[Carbon 2 bolt Short Fuselage(26cm) with cover](https://uni-foil.com/products/2-bolt-short-fuselage26cm-with-cover)** > > Full carbon, no foam, made using only the highest-quality premium materials. Stiff and durable for heavy riding and taper locked for no play.  39 cm - NEW extra long for wind wing racing and downwind (not recommended for prone/surf). 33 cm -... 33.5cm medium fuse - a few scratches - $250 > **[Carbon 2 bolt Medium Fuse (33.5cm) with cover](https://uni-foil.com/products/2-bolt-medium-fuse-33-5cm-with-cover)** > > Full carbon, no foam, made using only the highest-quality premium materials. Stiff and durable for heavy riding and taper locked for no play.  39 cm - NEW extra long for wind wing racing and downwind (not recommended for prone/surf). 33 cm -... 40cm long fuse - brand new - $275 > **[Carbon 2 bolt Long Fuse (40cm) with cover](https://uni-foil.com/products/2-bolt-long-fuse-40cm-with-cover)** > > Full carbon, no foam, made using only the highest-quality premium materials. Stiff and durable for heavy riding and taper locked for no play.  39 cm - NEW extra long for wind wing racing and downwind (not recommended for prone/surf). 33 cm -... FOIL KIT BAG - brand new Fits all the foils parts listed above: $150 (I can throw it in if you purchase a full kit) PRONE SURF / WING BOARD: Armstrong 4’10” Wing Surf Board - Full carbon including the mast tracks. Super light and stuff. Great for pumping, surfing and sinker board winging: $1400 Comes with Armstrong foil board bag 4’10” \> comes with armstrong board purchase TRAVEL FOIL BOARD BAGS - Mystic Travel foil board bag 5’5” \> $150 WINGNUT MAST SCREWS so you can adjust your mast position in the water: - One set of standard M8 30mm screws [Scot @ www.customwingscrews.com (@hydrofoil\_wingscrews\_hawaii) • Instagram photos and videos](https://www.instagram.com/hydrofoil_wingscrews_hawaii/) $50 - One set of swivel-click wingnut screws M8 30mm [@konrad\_boarding on Instagram: "Once you have had the ability to adjust your foil position on the fly, you will never want to go without. Introducing or Patent pending Click nut! Vital statics - The Clicknut weights in about the same weight as a SS screw the same size. Its light! - If it is coupled with out titanium T-nuts complete it weights the same as a single brass T-nut from our competitors. - It offers 22 clicks of adjustment to make it as close to straight as possible. - Corrosion resistant to stop any damage to other parts of the foil. - Easy to use. - Screw size M8 x 35 will fit almost all foils that utilise M8 threads. @foilhub @foiltheworld @wingfoildaily @the.progression.project #foilsurfing #hydrofoilwingnutscrews #loyaltothefoil #surffoiling #foiling #wingfoiling #pronefoiling #wingding"](https://www.instagram.com/p/C3jyOW_RS4c/?img_index=1) $80 DOUBLE COIL FOIL LEASHES - One Red Calf 6’ double coil Kaohi Leash [Kāohi Board Leash - Double Coil 5.5 mm](https://boardmeetingusa.com/products/copy-of-kaohi-grip-leash%E2%84%A2-double-coil-wing-sup-and-prone-foil-leashes?variant=43453539942587) $60 - One light blue ankle 5’ double coil Kaohi [Kāohi Board Leash - Double Coil 5.5 mm](https://boardmeetingusa.com/products/copy-of-kaohi-grip-leash%E2%84%A2-double-coil-wing-sup-and-prone-foil-leashes?variant=43453539942587) $60 Send me a message! ---
**Author:** ![beepityboppityboop](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/beepityboppityboop/32/6245_2.png) [@beepityboppityboop](https://forum.progressionproject.com/u/beepityboppityboop)\ **Post date:** [July 1, 2024, 3:02pm UTC](https://forum.progressionproject.com/t/uni-progression-200-170-140-125-masts-tails-fuses-and-armstrong-prone-board-for-sale/5952/3 "2024-07-01T15:02:20Z")
what’d you switch to? ---
**Author:** ![lebowski](https://avatars.discourse-cdn.com/v4/letter/l/7bcc69/32.png) [@lebowski](https://forum.progressionproject.com/u/lebowski)\ **Post date:** [July 21, 2024, 4:48pm UTC](https://forum.progressionproject.com/t/uni-progression-200-170-140-125-masts-tails-fuses-and-armstrong-prone-board-for-sale/5952/4 "2024-07-21T16:48:37Z")
I can’t seem to find a DM message on this site. Do you have any of the foil gear still? I’m in the market for a P140 and a 170 setup for a friend. ---
**Author:** ![Ron](https://avatars.discourse-cdn.com/v4/letter/r/ecae2f/32.png) [@Ron](https://forum.progressionproject.com/u/Ron)\ **Post date:** [July 28, 2024, 1:32pm UTC](https://forum.progressionproject.com/t/uni-progression-200-170-140-125-masts-tails-fuses-and-armstrong-prone-board-for-sale/5952/5 "2024-07-28T13:32:35Z")
Hi, is the progression 200 still available? ---
**Author:** ![seangalla](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/seangalla/32/2526_2.png) [@seangalla](https://forum.progressionproject.com/u/seangalla)\ **Post date:** [August 1, 2024, 11:50pm UTC](https://forum.progressionproject.com/t/uni-progression-200-170-140-125-masts-tails-fuses-and-armstrong-prone-board-for-sale/5952/6 "2024-08-01T23:50:03Z")
Just selling extra gear that Im not using around here. Still riding Uni! 🙂 ---
**Author:** ![Kfed87](https://avatars.discourse-cdn.com/v4/letter/k/58f4c7/32.png) [@Kfed87](https://forum.progressionproject.com/u/Kfed87)\ **Post date:** [August 3, 2024, 3:35am UTC](https://forum.progressionproject.com/t/uni-progression-200-170-140-125-masts-tails-fuses-and-armstrong-prone-board-for-sale/5952/7 "2024-08-03T03:35:08Z")
Is the 125, 200, or 750 mast still available? I’m interested. ---
**Author:** ![Ron](https://avatars.discourse-cdn.com/v4/letter/r/ecae2f/32.png) [@Ron](https://forum.progressionproject.com/u/Ron)\ **Post date:** [August 14, 2024, 3:05pm UTC](https://forum.progressionproject.com/t/uni-progression-200-170-140-125-masts-tails-fuses-and-armstrong-prone-board-for-sale/5952/8 "2024-08-14T15:05:53Z")
200 still available?