# Water trapped in aluminum mast

**URL:** <https://forum.progressionproject.com/t/water-trapped-in-aluminum-mast/3569>\
**Category:** Foils and Boards - Gear Talk\
**Created:** [October 25, 2023, 4:52am UTC](https://forum.progressionproject.com/t/water-trapped-in-aluminum-mast/3569 "2023-10-25T04:52:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FoilLight](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/foillight/32/2561_2.png) [@FoilLight](https://forum.progressionproject.com/u/FoilLight)\
**Post date:** [October 25, 2023, 4:52am UTC](https://forum.progressionproject.com/t/water-trapped-in-aluminum-mast/3569/1 "2023-10-25T04:52:52Z")

</div>

Does anyone have a solution for getting water out of an Aluminum Uni Mast? Sounds like about a half cup trapped in there and it doesn’t seem to come out no matter what way I turn it.

---

<div class="post-metadata">

**Author:** ![dillionaire](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/dillionaire/32/2800_2.png) [@dillionaire](https://forum.progressionproject.com/u/dillionaire)\
**Post date:** [October 25, 2023, 7:27pm UTC](https://forum.progressionproject.com/t/water-trapped-in-aluminum-mast/3569/2 "2023-10-25T19:27:06Z")

</div>

Pull pugs out of the end. Drink the “mast juice”, it makes you pump farther. Rinse out with fresh water. Let dry. Seal it with 5 minute epoxy.

---

<div class="post-metadata">

**Author:** ![FoilLight](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.progressionproject.com/foillight/32/2561_2.png) [@FoilLight](https://forum.progressionproject.com/u/FoilLight)\
**Post date:** [October 26, 2023, 3:20am UTC](https://forum.progressionproject.com/t/water-trapped-in-aluminum-mast/3569/3 "2023-10-26T03:20:37Z")

</div>

I drank it mixed with some bong-water, leveled up my pumping🤢. I don’t even need a tail stabilizer anymore