What the F**** is going on with Unifoil stock

The Anticipation? Intermission? Digression?

If they go full on super efficient UHA with tons of low end that can be downsized a lot: Microaggression

7 Likes

Passive-aggression, perfect for the parawingers

3 Likes

I set my tracks where my back foot lands, I always ride with my back foot on the front half of the mast. My pinky toe should be approximately over the center of the mast. (For me… Not perfectly over the mast, and definitely not in front of the mast)

When you narrow your stance to pump, your front foot moves back. If you’re hitting foam, your back foot moves back, to the back half of the mast.

2 Likes

I’m not sure about it being a skill thing. I like to switch things up to try to dial in a feel for certain conditions. For the EVO 135, if smooth ocean and on foildrive: Xtra short fuse, -.05 shim, AB 13.5. If a bit of chop or disorganized, Short fuse. I did a paddle in session yesterday and went with the short fuse and -.1 shim and really liked it. Next paddle in session going with Quantum 14 to see how that feels. If the Med fuse and 15AB feel good to you, stick with that.

I made the jump to code this month, here were my thoughts

I rode uni for 2 years, loved the evo 155 and travelled extensively with it as my one wing quiver.

I initially bought into their system as it seemed simple and easy to navigate with solid connections, simple universal hardware and a few stores with good prices across aus (a new foil for about $1200 Aud ish with warranty and strong immediate customer service as there were physical stores). Plus a well represented pro team that really drove innovation and actually ripped in the surf.

The direct to consumer was a mess, drastic price increases, poor service, no stock with increasing prices still, minimal innovation that was tangible (Great that they designed a new wing but I can’t get one in 5months isn’t really innovative for anyone other than the pro team).

all under the guise of dtc being for the foiler and making the bottom line cheaper, it got more expensive.

I went code, have an extensive market of in stock foils to choose from, the brand new r2 is cheaper than an already year old quest (still out of stock), I have stores I can go and demo (imagine walking to a store asking to try a brand new just released foil, liking it, buying it, in one day… impossible with uni), I get immediate warranty in Aus, I have a plethora of good well made and designed tails to work with and trial. Let alone the second hand market, I can buy most sizes for half the price of new, it makes just buying and trying an option. They also have a really strong pro team which they fund properly with regular content, tech insights and future updates, with the highly experienced riders, clearly helping drive new foil design.

I’d really consider going back to uni I genuinely love the evo155 and have about 150 logged hours of riding.

But the unreliable sales/service and pricing turns me away let alone the stock and constant hyping of a new next best foil, its always “next level is coming… next year”, whilst code consistently release quality models with simple logical upgrades that work for the average foiler.

Hope maybe that gives some inspiration, or food for thought from a view in Australia but as always do what will get you stoked to get on the water more, that’s why we foil :slight_smile:

6 Likes

Completely understandable and a very good summary of the frustration many Uni riders have, including myself. It’s painful to hear of so many long term Uni supporters basically being forced to switch to other brands.

I am knee deep in Uni wings accumulated (hoarded?) over years so no chance of switching. I just managed to upgrade from Katana to Torque mast. It’s such a beautifully constructed and solid upgrade and i’m a bit pissed that i missed out on that lever of performance while waiting for stock for over a year. I realy hope Uni can fix their business.

Probably off-topic but i would love to hear more about this. How much did you chop span-wise and how’s the ride? My reef ploughing 140 and 170 are begging for a trim.

That’s a really interesting read and something a few of us have been thinking about for sure.

Is been a frustrating run, with lots of talk about how well the company itself is doing now and how cheap the foils are, but that’s not really been my experience.

As far as I can tell, there’s lots of Prog and Evo foils which need to be sold, the Quest and Aggression production has ceased, and there’s… something being designed which will supersede them both.

I dunno, there’s a bit of ‘we can’t say too much now’, but why not? We can’t buy any new foils anyway, so Uni might as well tell us what they’re working on and why we should wait around and not jump ship.

It’s frustrating because the actual foils themselves are great, but yeah, the title of this thread sums it up.

5 Likes

Given I’m perfectly happy with my e155 for smaller stuff (especially now I’ve got the 22cm fuse and 13.5ab), I really just want a smaller surfy mid aspect to go alongside it. So if the Aggression 130 isn’t coming out anytime soon/again at all my plan is to wait and see what details emerge over the next few months about the new wing. If nothing is forthcoming or if it doesn’t fit into that aggression type aspect ratio then I may just pick up a uni-code adapter and get an 810x plane. So less jumping ship, more the best of both worlds.

I don’t get the "can’t say too much for now " mentality from any foil brand manufacturers. I jumped ship from one big brand because of the secret sudden foil releases. I went to another brand that I felt had more of a tribe vibe however unfortunately they now are doing the same thing.

I feel when we buy into a brand we should be the ones knowing what’s going on. This secret squirrel BS does my head in.

1 Like

I’m with you…and while I understand Uni being a bit shy on this front after what happened with the Quiverkiller, explaining the basic idea is a far cry from showing off a proto at AWSI.

I think saying something like “working on __ new product, will announce details at ___ date, with a target release date of __ .” would be constructive, and better rather than vague cagey teasers.

Or at least more of an explanation of the constraints and the communication strategy.

I wish Uni well, and did enjoy the Prog’s for a while, and am now happy to have moved on.

2 Likes

My simple, not involved in the industry in anyway, understanding is.

It’s because the shops get mad when they have stock left over they can’t sell. Shops buy all the stuff ahead of time. If they have stock of gear and the company then says, we have a new foil coming in 4 months! Why would you buy the current foil from your local shop when the next best thing is about to come out and make the current stock worthless. So the shop has already spent the money and won’t make another purchase from the brand until they’re mostly sold out.

Now you say to me, you say. But Unifoil is now Direct To Consumer! No shops involved! That way it’s even worse. Unifoil themselves are the one who are on the hook. They bought too much stock of whatever foils they currently have on their website. All their cash flow is tied up in those foils. Until they sell those foils, they can’t order the next run. Sure they are prototyping currently. But you can’t spend money you don’t have to order another new run of foils until the last foils are sold out.

Mark Shinn talking about AXIS pump foils on the latest GFP says. We have better pump foils than the Fireball 1750 which is the current record holder. It does us no good to release a foil that’s better than that, until another brand comes up with something as good at it and can take our records. When another brand does that, then we will be 2 or 3 more prototypes ahead of them. That’s when it will make sense to release the successor to the Fireball 1750.

It’s all a game.

2 Likes

Erik had mentioned an Evo overstocking problem in a post 10d before.

We can evaluate the amount of stock on those by playing on the website

So we get: 115 (6), 135 (9), 155 (0), 175 (13), 205 (12), 235 (10)

That’s a total of about 50 wings in stock, which is roughly $25K of potential sales, and which would surely come in handy when preparing new molds and materials for a new batch.

4 Likes

Well played sir :rofl:

It makes these “sale” items even harder to sell when you don’t have the mounting hardware in stock. I just don’t get it.

Hey

Since the castration of it;'s tips I have only used the wing once, a prone session in head high onshore surf. For sure it has loosened the wing up some more, has not lost any glide and I felt I cranked some solid turns breaching the tips which didn’t affect my surfing at all. I’d also go as far as saying that it still pumps as well as before, although there was an onshore wind to contend with. Definitely keen to give some sessions !!.Set up - short fuse, 13.5 AB with +0.5 shim.

Span is now 835mm chopped from 898

I could have written this same post.

They may be in a “better position financially” right now but they have lost so many customers from their ecosystem that they’re not going to be selling too many of their next gen foils even when they do come out. Creating and selling foils is a very interesting business indeed.

1 Like

Its hard to reestablish customer trust after all this

Losing customers and not picking up new ones. It’s a little uncomfortable to me TBH. I feel like I’m watching a company die in real time.

It brings up an interesting (at least to me) conversation about how a company like Uni is likely paying its employees, right? I assume the people affiliated with Uni are making money. VS a company like F4 that has a lot of money from independent backers and isn’t paying anyone (Chris disclosed this in GFP). The sustainability of a small company that wants to be nimble but pay employees vs the psycho fast pace a company that is not paying employees and isn’t financially invested in the same way is wild.