Much has been said already about the smaller Helix sizes, and for good reason. I’ll definitely spend some time glazing them in this post but will try to mostly focus on the 1100.
Reviewer:
I prioritize riding waves in whatever foiling I am doing. I parawing if there is wind, and prone paddle at surf breaks. I’d say i’ve achieved competency at both now. Can mostly access any parawing setup and can link up to 10 waves while doing pure surf foiling. I’m about 180 pounds. My main point of comparison with foils are the code 850s, 860r, 810x, and 1130s. Most of the time using the crisp 110 flex tail and the xs fuse and code 80+ mast. I am now riding the helix 775 and helix 1100 with the 120 pivot and 80cm mast for all my foiling.
I have now had the Hydrocraft about 3 months and used it in every marginal setup I ride including:
Light wind days in the Gorge
knee high wind swell at my local tide opposing wind setup
1-4 foot breaking surf in the pacific rim national park
Dockstart foiling
With all that boring shit out of the way, holy cow this is the best large foil i’ve used to date. There are a few things that really set it apart from other big foils I have used but first and foremost is that the speed through the water is phenomenal. It has the ability to go quite fast without feeling draggy at all. It also doesn’t lock in aggressively even at higher speeds on bigger waves. I dont think it’s an exaggeration to say the turning is faster and smoother than the 860r and 1130s, which were previously my go to marginal condition foils. Starting with the gorge conditions, I was enjoying this foil multiple days where the wind wasn’t breaking 18 miles an hour at the hatchery. Long marginal downwinders have also been dreamy on the 1100. It’s got enough support for me to pump out of almost any hole, and an excellent low end but I feel like I can jump out and start turning pretty aggressive on it with no issue at all. It’s been a revelation at my local marginal spot. We get so many days with wind hovering between 12 and 20, gusty with various tide states stacking waves from ankle sized to waist high and the big boy has been so much fun in all of it! I’m a super firm believer in the less tuning the better when it comes to foils and I love love love that I can just have one tail that feels really good in all conditions and on both foils I own. I haven’t minded the gap between the two foils at all (although the 900 sure does sound really great and I wish I had one). In this aspect the system blows the code out of the water. I was always wondering if i was supposed to go up or down a foil size, what fuse size, is there a better tail system for these conditions? I think consistency is huge to performance and just always rigging the same stuff has really leveled up my surfing.
At the dock, the foil is also really quite good! I’ve gotten up to two minutes pumping it the way I have it setup. It’s not a distance foil or anything but it’s fast and turns well. I’ve had a lot of fun just going out and doing little loops around, seeing how tight of a 180 I can carve and still recover. It has enough early lift for me to start it with two steps every jump. I dockstarted the 1130s a good bit and I would say the helix is much easier to launch with. The stall speed and ability to gain speed from the jump are an observable improvement. I can pump it about 30 seconds longer than I could pump the code setup. I don’t know exactly why this is, but i’m going to wildly speculate that DRAG plays a role. It literally just feels faster through the water. Some of this is the very streamlined connection but a lot of it has to be the mast. A quick aside on the connection… the clamping force the plate and horizontal bolts puts down is pretty cool. With code some of my foils had better or worse fits on the mast head, but with this system every foils feels like it has the ‘dream fit’ where it’s just crazy snug on there. I don’t know at what span of foil the Hydrocraft mast would start feeling too flexy at my weight but it’s way wider than whatever the 1100 is. I have been wanting for nothing on the stiffness front. The aspect of this foils is 9.5, down from 10.2 in the rest of the range.
In the last week i’ve gotten 9 prone sessions on the foil, all 1-4 foot, mushy, low energy rollers on the west coast of Canada. This thing has really helped me level up my surf foiling, now i’m getting almost every chip I attempt and standing up and getting on foil almost every chip. Some of that is progression in the sport, and a lot of that is just how consistent the lift feels as the foil rises toward the surface. I found it to be incredibly easy to ride high on the mast for the same reason. My previous best earlier this year was 3 waves, but this trip my cardio felt like the only thing holding me back. It gets through the white water really well too. I found my self letting the wave close out and just pumping back through the frothy water, it was totally approachable. The one day the surf was more powerful I did find the top limit of what felt good, but it was easily chest high waves and dropping down to the 775 (also just a great surf foil) was an easy adjustment. A small detail I think is really strong with this foil is the feedback you get as you approach the top of the mast. Maybe it’s in my head but I found it really easy to tell when I was high on the mast and I felt really confident getting as far out of the water as possible.
The foil checks every box for a small condition foil. Early lift, super controlled lift, tons of glide, and most importantly it TURNS. I don’t know what more I’d want out of it. A lot of bigger foils seem like an afterthought to me but Hydrocraft didn’t phone this in as just another size. They put a lot of really nice details in that make it stand out as the best small condition foil i’ve tried.
All this said the gear speaks for itself. Check them out if you ride in these conditions and are looking to move brands. If you live near hood river the demo’s are super easy to do. Go support a great group of people making a super performance product at a very fair price.