Best ~5m parawings

What parawings in the ~5m size range are people liking? Needs to have good low end (useable from 13/14 knots), upwind, and shorter lines. Stow/redeploy is a high priority so shorter lines and packable canopy are important. Hoping to demo the Frigate v2 5.5 and Ozone PR v2 5m (would love to try the Ultra X but we’ll see) this winter, but curious what other people are liking. Coming from the F-one Quest 5m which is serving me very well, but would take more upwind if there aren’t major tradeoffs. Max fun over max VMG for me.

Liking the sound of lighter (~25g) canopy materials particularly in these big sizes.

FYI the big LW Frigate v2’s aren’t out yet, the ones with lighter fabric (5.5 and 6.5m)

1 Like

Yep. Supposedly coming end of the month - heard mention that as of AWSI they were still tweaking design on those sizes, so maybe this month gets pushed. Curious to hear the reviews on them.

just got a 5m PRv2 a few days ago. only had one session on it but really enjoying it so far. also have a 3.6 PRv1, and found the v2 is a lot easier to stash, even if for quick rides and then redeploys. thicker and shorter lines, better bridle and bar system. can’t go wrong.

1 Like

5.7 PR V2 is definitely up there especially if your a heavier rider

I’m happy with my 5.0 prv2

1 Like

Very happy with my BRM S3 5.3. Might go L1 5.5 now for easier handling when the wind drops to 8-10 but personally I am fully tuned into the performance of the S3 and not tempted by any other parawings currently. Covers me from 13-20 comfortably. Best pump I have felt from a pw yet so great low end and very comfortable top end. Just try before you buy because it is a technical flyer that some don’t gel with.

2 Likes

do you think a 5m/3.6m gap works with these? Im a little bit tangle-scarred coming from the PR v1, but Ive played with the v2 a bit and it seems a lot better.

I have a 3.7 flow v2 as my next size but I would think a 3.6 pr2 would be fine. Douse and redeploy are good

1 Like

Try the hatch v2. I have a 3.5 but on my last run I was able to pop well before a buddy on a larger PRv1.

it has amazing stability, low end, and you can pump it almost like a wing.

1 Like

the 3.6 prv2 is very nice. easy douse/redeploy (relatively). i struggled with the v1s

i am probably going to order a 5.1 Hatch V2 today, just to try something different. i have the Quest 5.0 and it is very user friendly. i am hoping the hatch handles a little better in really light wind. i have trouble downlooping the Quest and am hoping the Hatch whips around a little quicker. Also seems like the Hatch will sit further forward in the window, so tacks would be more approachable.

1 Like

off topic, but I’ve gotten to a very high success rate downlooping or heineken gybing the quest. The trick for me was to enter the maneuver with my back hand holding the bar underhanded. The hand switch or stall at the bottom of the loop when I used the front hand was messing me up before I figured this out.

2 Likes

Yeah, I’m sure the biggest problem is me and poor technique

When you say back hand - do you mean the new back hand after the gybe?

No - the back hand as you are entering the gybe. For goofy heelside I would use my left hand holding the bar underhand going into the gybe, whip it around and finish overhand. For goofy toeside I would enter using my right hand underhand and finish overhand.

Most people use the front hand overhand and then end underhand. My method eliminates the dead spot at the bottom of the turn where your either need to cock your wrist awkwardly or switch hands.

1 Like

Vote here for the 777 PT Skin 5.4m. It has two dual skin cells at each tip which makes it super stable in flight. The only downside is that the wing tips are prone to filling with water so you have to drain them for a few seconds after each crash.


Is the upwind an issue on Quest 5? Only in light wind?

I have not had success trying to learn parawing on 3.5 Frigate. Would the Quest 5 work for me in light wind (93kg) or should i also be looking elsewhere?

Maybe take a look at the 5.5 flysurfer pow v2, it seems to be extremely grunty, but the depower is bad, on youtube you can find a modification of the bar and lines so that it gets better depower. Another one is the naish hatch v2 in 5.1 everybody likes it, no modifications needed. And armstrong is releasing a trimmable model, that might be interesting too. PPC will follow with something similar, also a trimmable singleskin. I will probably go for the naish.

Quest goes upwind fine but when you are really pushing it upwind it rides pretty slow. So upwind angle is fine but VMG isn’t very good. it’s a lower aspect sail and you trade a bit of upwind speed for maneuverability, simplicity and ease of use.

2 Likes

The pow2 mod is only to add a pulley to C lines and Z lines if you want to be able to dump all power. there is no line or bar mod involved.

1 Like

I’m foiling in mostly very tight period great lake swell with cross chop, 78cm mast. My thinking is I can’t go fast due to the conditions so can’t get the VMG you typically see here unless I change to a much longer mast but lose on the downwind run.

For these conditions, slower is not necessity a bad thing.

Or am I mistaken?