Unifoil mast bolt pattern

1

I am trying to find the measurements of the bolt pattern on the Progrsssion 800 and the new 80 torque masts. Thanks.

2

What kind of measurement do you need . The bolts for the mast are m8x30

3

Distance from front bolts to back bolts. Center of hole to center of hole.

4

O---------------------O
l this distance l

O---------------------O

5

or measurement is the correct way to put it

6

torque mast 140x90
progression mast 140x90
race is 165x90
Above is from a reliable source…
My Katana mast matches the Race mast dims.
You also prefer fixed board inserts?

1 Like
7

Thanks,

I ordered a custom trench board for foildrive, and the bolts are fixed. I went this route knowing I sacrificed ease of use for stiffness and all out performance. I have the Integrated NoLimitz mast that has a unique bolt pattern. I wanted to have a Unifoil mast dedicated to fitting this board. Just want to see if I have to drill out 2 extra holes, if there is room to do this. Would either be the Progression, or the Torque.

Now thinking about it, I would also need the overall dimensions Length and Width of the baseplate on the Torque and Progression. ( I have a couple of Katana masts).

8

Can you explain /draw what it looks like ?

9
10

Looks like a super nice board.
Much better than the trench ones.
Yep be careful choosing the spacing.
A single millimeter off and it won’t be usable