Code 1130S or 985X to Teach a Youngings Between 105 lbs - 130lbs

I’m thinning my Code quiver to my most used foils and possibly to make room for S V2 when they drop. I’m looking at my 1130S and my 985X and thinking about that overlap. I’ve started to teach my girls to foil and I figured the 1130S or 985X would do the trick at 105lbs for one and 130lbs for the other.

I kinda want to sell the 1130S and keep the 985X. You guys think I could teach them with that, or rather just stick with the 1130s?

I assume they want to learn wing? or behind a boat?

Oh, I should have been more specific. Wing. I’d start them behind a boat. But I lack the boat.

Haven’t tried either of those, but here’s a data point. For my beginner winger wife in that same weight range, 860r was too small, she likes 1075r/1250r. So 985x might be smallish.

I mean, if she’s making it work on an R foil, the 985X should be easier. R foils are too locked in for beginners. I wouldn’t start there. The lift between the 1130s and 985X isn’t too different. 860R is a bit more. But the 985X’s roll is what concerns me a bit. But at least they won’t lock up and get bucked off, which was my main problem when learning a few years ago.

I’ve been teaching my 100lb son. He found the 1130S very lifty and too locked in at his body weight. It got him on foil very quickly but perhaps too quickly for a beginner to control. 985X would be good for a few lessons for easy progressive lift. After a few lessons I moved my son on to the 720S and he goes much better on that. (Note: this is for wing foiling)

Awesome! That’s what I was hoping. I have smaller foils… but my concern was how stiff the 1130s probably feels for someone that light. That said, my oldest is 130lbs. Maybe for her it’ll be fine.

I’m 200lbs and hang ten on an 1130s winging… no reason imo to start on a too large foil thinking that getting on foil from slow speed is a plus. Most beginners are fighting the pull of the wing and lean back the second the foil lifts. I’d say go bigger on the board to learn to taxi well. A 720s is plenty of lift for 130lbs. Put on a 150 stab and long fuse.

Where the bigger foil is a plus if if you are on a flat water lake with light and gusty conditions, then the 1130S foil might be fun to pump around on once you are ready for that.

1 Like

That’s a good point. I guess my thoughts are based on how I learned… which was on a big ol’ HS1850 at 185 lbs. I may not go as small as a 720s for my kids to start… but you’ve definitely convinced me the 1130s is just too big. I might give a 980S a shot with them and keep and eye on the way they are falling to see if I have to go smaller.

The benefit for them is they have access to tons of foils thanks to me. When I learned I had ONE foil.

1 Like